Initialising the moon roof
Re-initialise the roof if it does not respond to its switch or to voice control, or if it loses its memory position after a jam protection fault.
- 1Close the moon roof fully.
- 2Push the moon roof switch forwards and hold it for more than 10 seconds.
Caution:If the roof cannot be initialised, or it reverses when nothing is in the way, have it seen to by an authorised Jaecoo service centre.
Jam protection
If the glass meets resistance while closing, it reverses automatically. If this happens while sliding, it goes back to half open. If it happens while tilting down, it goes back to the tilted position.
Overheat protection
Avoid opening and closing the roof many times in a short period. The motor can overheat and the roof will stop responding until the motor has cooled, then it works again automatically.