Skip to content
JAECOOOWNERS UK

JAECOO 7 handbook · Controls & features

Windscreen wipers

Wiper speeds and automatic rain sensing
Official manufacturer dataApplies to: Petrol and Super Hybrid (SHS-P)Source: Petrol handbook p37-38 · Super Hybrid handbook p36

Switch the car ON (petrol) or to READY (Super Hybrid) to use the wipers.

Wiper stalkPetrol only

Wiper stalk positions
Wiper stalk positionsPetrol only
  • MIST – move the stalk up: the wipers wipe once and stop.
  • OFF – wipers run at low speed until they reach the park position, then stop.
  • AUTO – wiper speed changes automatically with the amount of rain.
  • LO – slow, continuous wiping.
  • HI – fast, continuous wiping.
  • Petrol only

In AUTO, turn the sensitivity ring on the stalk to adjust how readily the wipers respond.Petrol only

Rain sensor sensitivity
Rain sensor sensitivityPetrol only

Wiper rollerSuper Hybrid (SHS-P) only

Front wiper roller
Front wiper rollerSuper Hybrid (SHS-P) only
  • HI – push the roller to HI for fast, continuous wiping.
  • LO – slow, continuous wiping.
  • AUTO – wiper speed changes automatically with the amount of rain.
  • OFF – wipers run at low speed until they reach the park position, then stop.
  • Single wipe – briefly press the button on the wiper stalk: the wipers wipe once.
  • Super Hybrid (SHS-P) only

Caution:Do not use the wipers on a dry windscreen or when there is debris on it – this can damage the blades, scratch the glass and damage the wiper motor.

Caution:In cold weather, check the blades are not frozen to the windscreen before use. If they are, defrost the windscreen first, or you may damage the blades and motor.