Fuses protect electrical parts and circuits from short circuits and overloads. If a fuse blows, the components it protects stop working properly. There are two fuse boxes.
Front compartment fuse box

- 1Switch the vehicle power OFF.
- 2Disconnect the battery negative (−) cable.
- 3Remove the fuse box cover to check or replace fuses.
- 1Press the power button in the control centre to switch the vehicle off.
- 2Open the boot, fold back the boot carpet, remove the storage box and disconnect the 12 V battery negative cable.
- 3Remove the fuse box cover under the bonnet to check or replace fuses.
Instrument panel fuse box

- 1Switch the vehicle power OFF.
- 2Disconnect the battery negative (−) cable.
- 3Remove the lower right trim panel of the instrument panel to check or replace fuses.
- 1Press the power button in the control centre to switch the vehicle off.
- 2Disconnect the 12 V battery negative cable in the boot.
- 3Remove the lower left trim panel of the instrument panel to check or replace fuses.
Note:Use the fuse and relay layout to find the right fuse – the amp ratings are shown on the diagram inside the fuse box cover.
Note:Take care removing and refitting the lower dash trim to avoid damage. Ask an authorised Jaecoo service centre if needed.
Caution:Keep the fuse box clean and dry when it's open – dirt and moisture can damage the electrical system.