Skip to content
JAECOOOWNERS UK

JAECOO 7 handbook · Emergencies & breakdown

Replacing the 12 V battery

Removal and fitting
Official manufacturer dataApplies to: Petrol and Super Hybrid (SHS-P)Source: Petrol handbook p219 · Super Hybrid handbook p228-229
12 V battery location under the bonnet
12 V battery location under the bonnetPetrol only
12 V battery under the boot floor
12 V battery under the boot floorSuper Hybrid (SHS-P) only
  1. 1Switch the vehicle power OFF.
  2. 2Open the bonnet.
  3. 3Disconnect the negative (−) cable.
  4. 4Disconnect the positive (+) cable.
  5. 5Remove the battery holder and lift out the battery.
  6. 6Fit a new battery of the same specification.
  7. 7Refit everything in the reverse order.
  1. 1Press the power button in the control centre to switch the vehicle off.
  2. 2Open the boot, fold back the boot carpet and remove the storage box.
  3. 3Disconnect the negative (−) cable.
  4. 4Disconnect the positive (+) cable.
  5. 5Remove the battery holder and lift out the battery.
  6. 6Fit a new battery of the same specification.
  7. 7Refit everything in the reverse order.

Note:The car has a maintenance-free battery. A replacement must have the same specification as the original. Jaecoo recommends having it replaced at an authorised service centre.Super Hybrid (SHS-P) only

Caution:Don't let a metal tool touch both terminals at once, or touch the positive (+) terminal and the bodywork at the same time.

Note:Dispose of the old battery according to local environmental regulations.