The towing eyelet is kept with the tools under the boot floor. It screws into a hole behind a cover in the front or rear bumper.
Front
- 1Use a flat screwdriver with its tip wrapped in tape to prise off the front towing eyelet cover.
- 2Screw the eyelet in clockwise, then tighten it firmly with the wheel bolt wrench.
Rear
- 1Use a taped screwdriver to prise off the rear towing eyelet cover.
- 2Screw the eyelet in clockwise, then tighten it firmly with the wheel bolt wrench.
Warning:Make sure the eyelet is screwed in securely. If it comes loose while towing it could cause an accident and serious injury or death.
Caution:Only use the specified towing eyelet, and only attach a tow rope or bar once it's fully fitted.
Caution:Tow slowly and smoothly – jolts from a tight rope can damage the car.