Skip to content
JAECOOOWNERS UK

JAECOO 7 handbook · Emergencies & breakdown

Engine overheating

High coolant temperature – what to do
Official manufacturer dataApplies to: Petrol and Super Hybrid (SHS-P)Source: Petrol handbook p217 · Super Hybrid handbook p225-226

If the coolant temperature gauge approaches the H zone, or the red high coolant temperature warning light comes on, stop somewhere safe away from traffic.

High coolant temperature warningPetrol only

High coolant temperature warningSuper Hybrid (SHS-P) only

  1. 1Stop on firm, level ground.
  2. 2Apply the parking brake and select P.
  3. 3Turn off the air conditioning. (Water dripping from the A/C after use is normal.)
  4. 4Let the engine idle for several minutes, then switch the vehicle power OFF and turn on the hazard lights.
  5. 5Before you open the bonnet, look for steam or coolant overflowing or leaking. Only open the bonnet if there is none.
  6. 6Check the coolant level. If it is normal, the radiator fan may have failed – contact an authorised Jaecoo service centre straight away.
  7. 7If the coolant level is low, contact an authorised Jaecoo service centre straight away.
Never open the bonnet while steam or coolant is escaping
Never open the bonnet while steam or coolant is escaping

Note:If the coolant is low, you can top up with water as a temporary measure. Have the coolant replaced at an authorised Jaecoo service centre as soon as possible.

Caution:If the engine overheats, have it inspected and repaired by an authorised Jaecoo service centre immediately.Petrol only

Caution:If the engine overheats frequently, have it inspected and repaired by an authorised Jaecoo service centre immediately.Super Hybrid (SHS-P) only