Skip to content
JAECOOOWNERS UK

JAECOO 7 handbook · Controls & features

Fitting an ISOFIX child seat

ISOFIX/i-Size anchors and top tethers
Official manufacturer dataApplies to: Petrol and Super Hybrid (SHS-P)Source: Petrol handbook p64, p66-68 · Super Hybrid handbook p62, p64-66

Both rear outer seats have ISOFIX / i-Size anchorages, marked by an ISOFIX label on the seat back directly above them. Top tether anchorages are on the back of the rear seats.

ISOFIX markings – press PUSH to reach the anchors
ISOFIX markings – press PUSH to reach the anchors

Fitting the seat

  1. 1Find the ISOFIX anchorages and set the rear backrest to its most forward (upright) position.
  2. 2Press the PUSH flap to uncover the anchorages.
  3. 3Place the child seat on the rear outer seat.
  4. 4Attach the child seat's ISOFIX connectors to the anchorages. Extend the support leg if the seat has one.
  5. 5If a top tether is needed, remove the head restraint and the luggage cover, route the tether to the anchorage, attach it and pull it tight to remove all slack.
  6. 6Push and pull the child seat in different directions to check it is secure.
Top tether anchorages on the rear seat backs
Top tether anchorages on the rear seat backs

Note:Remove the head restraint first if it gets in the way, and always before using a top tether. Store removed head restraints safely. Refit the luggage cover once the seat and tether are installed.

ISOFIX size classes

ClassFixtureType
AISO/F3Full-height forward-facing
BISO/F2Reduced-height forward-facing
B1ISO/F2XReduced-height forward-facing
CISO/R3Full-size rear-facing
DISO/R2Reduced-size rear-facing
EISO/R1Rear-facing infant seat
FISO/L1Left lateral-facing (carrycot)
GISO/L2Right lateral-facing (carrycot)

Petrol only