Before and while using the cameras
- Unfold the door mirrors and make sure the tailgate is firmly closed.
- Distances shown on the screen are not the same as real distances.
- Do not put anything over the cameras.
Caution:Do not scratch the lenses when cleaning off dirt or snow.
Caution:The cameras are calibrated at the factory. Removing, refitting or changing their position or angle without authorisation can affect how the system works.
Caution:The camera image does not show true size or distance, it lags slightly behind reality and has blind spots. It does not replace your own judgement - keep watching your surroundings while it is on and while turning it on or off.
Black screen
If the system detects a fault with itself or a camera, that camera view and the bird's-eye view go black with a message or symbol. Common causes:Petrol only
- Pressure washing - high-pressure water or steam can get into the camera, mist the lens or short-circuit it. Do not pressure-wash the camera areas.
- Knocks - hitting or tapping a camera can move it or damage it, misaligning the image or blanking it.
- Tampering - do not take the cameras apart. A poor connection can cause a black screen.
- Heavy rain - water getting into the connector can short the system. Check whether water has got into the camera mounting.
- Electrical load - when lots of electrical equipment is running, voltage changes can blank the screen. Turn off other equipment and restart the car.
- Petrol only
Note:If a black screen persists, have the system checked by an authorised Jaecoo service centre as soon as possible.Petrol only